Electrical Home Emergency Website banner Electrical Home Emergency Orange

Electrical Services         Rewires           Testing           CCTV           Alarms           Smart Homes           Contact Us    

Facebook circle white large Google + circle white large Twitter circle white large

01772 657 974

Our Prices start from £110.00

Electrical Installation Condition Reports (EICR)

electrical installation condition report

Condition Reports explained


You cannot see electricity. Cables are usually hidden inside our walls, and consumer units are often hidden in cupboards, so it is not surprising that we forget to check the condition of our

electrical installation for damage or wear and tear.


Faulty and old wiring is one of the main causes or electrical fires in the home. You can reduce the risk of a fire by checking the condition of your cables, switches, sockets and other accessories




How old is my electrical installation?


Clear signs that can help you tell the age of equipment in the electrical installation in your home include:

   Fixed cables coated in black rubber (stopped being used in the 1960s).

   Fixed cables coated in lead or fabric (used before the 1960s).

   A fuse box with a wooden back, cast iron switches, or a mixture of fuse boxes (used before the 1960s).

   Older round pin sockets (or light switches), braided flex hanging from ceiling roses, brown (or black) switches, or sockets mounted in or no skirting boards (used before the 1960s).

   Light switches on the walls or in bathrooms (used before the 1960s).




However old your electrical installation is, it may get damaged and will suffer from wear and tear. So you should get an electrician

to check its condition at least every 10 years or when you move into a new property.

What is the aim of an electrical installation condition report?




The five main aims of an electrical installation condition report are:

   Record the results of the inspection and testing to make sure the electrical installation is safe to be used until the next inspection (following any work needed to make it safe)

   Find any damage and wear and tear that might affect safety, and report it

   Find any parts of the electrical installation that do not meet the IET Wiring Regulations

   Help find anything that may cause electric shocks and high temperatures

   Provide and important record of the installation at the time of the inspection, and for inspection testing in the future.




 Types of condition report

In general, there are two types of domestic electrical installation condition report:


   Visual condition report - this does not include testing and is only suitable if the installation has been testing recently.

   Periodic inspection reports - this is what we would normally recommend, as it tests the installation and would find any hidden damage.